CICLOPS: Cassini Imaging Central Laboratory for OPerationS
Callisto Hemispherical Globes

Callisto Hemispherical Globes
PIA 03876

Image 8860 x 4490:
PNG 36.2 MB


The images used for the base of this globe were chosen from the best image quality and moderate resolution coverage supplied by Galileo SSI and Voyager 1 and 2 (Batson, 1987; Becker and others, 1998; Becker and others, 1999; Becker and others, 2001).

The digital map was produced using Integrated Software for Imagers and Spectrometers (ISIS) (Eliason, 1997; Gaddis and others, 1997; Torson and Becker, 1997). The individual images were radiometrically calibrated and photometrically normalized using a Lunar-Lambert function with empirically derived values (McEwen, 1991; Kirk and others, 2000). A linear correction based on the statistics of all overlapping areas was then applied to minimize image brightness variations.

The image data were selected on the basis of overall image quality, reasonable original input resolution (from 20 km/pixel for gap fill to as much as 150 m/pixel), and availability of moderate emission/incidence angles for topography. Although consistency was achieved where possible, different filters were included for global image coverage as necessary: clear for Voyager 1 and 2; clear and green (559 nm) for Galileo SSI.

Individual images were projected to a Sinusoidal Equal-Area projection at an image resolution of 1.0 kilometer/pixel, and a final global mosaic was constructed in this same projection. The final mosaic was enhanced using commercial software. The global mosaic was then reprojected so that the entire surface of Callisto is portrayed in a manner suitable for the production of a globe. A specialized program was used to create the "flower petal" appearance of the images; the area of each petal from 0 to 75 degrees latitude is in the Transverse Mercator projection, and the area from 75 to 90 degrees latitude is in the Lambert Azimuthal Equal-Area projection. The projections for adjacent petals overlap by 2 degrees of longitude, so that some features are shown twice. The northern hemisphere is shown on the left, and the southern hemisphere is shown on the right.

Names shown on the globe are approved by the International Astronomical Union. The number, size, and placement of text were chosen for a 9-inch globe. A complete list of Callisto nomenclature can be found at the Gazetteer of Planetary Nomenclature (
Image Credit: NASA/JPL